Main Unit - Panasonic DMR-EZ48V Operating Instructions Manual

Main unit

1
EJECT
AV2 IN IN 2 S VIDEO S VIDEO VIDEO VIDEO
6
7
1 Cassette eject button (➡ 14)
2 Disc tray open/close button (➡ 14, 16)
3 Start recording button (➡ 18)
4 Stop button (➡ 16, 17, 18, 32 )
5 Play/x1.3 button (➡ 17, 32 )
6 Standby/on switch (Í/I) (➡ 10)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of
power.
7 AV2 input terminals (➡ 27)
8 DVD/VHS drive indicator (➡ 16,18)
≥Lights when the DVD or VHS drive is selected.
The unit's display
(for VHS)
 (for VHS)
1 Timer recording indicator (F) (➡ 19. 29)
On:
When a timer recording programme is registered and a
recordable disc or video cassette is inserted.
Flashes:
When the unit cannot record a timer recording programme (e.g.,
there is no disc or video cassette, etc.).
2 Tape indicator
3 Operation status
4 Recording mode indicator (➡ 18, 24)
Remote Control Cassette
signal sensor compartment
L L /MONO AUDIO R /MONO AUDIO R
The unit's display
Opening the front panel
Press down on the
part with your finger.

2
OPEN/CLOSE
CH CH
DRIVE SELECT
:
8 9
9 DRIVE SELECT button (➡ 16, 18, 38)
≥Drive changes each time you press [DRIVE SELECT].
: Channel Select button (➡ 15, 18)
; DV IN terminal (for a digital video camcorder) ( ➡ 28)
< One Touch Copying operation button
≥From VHS to DVD (➡ 20)
≥From DVD to VHS (➡ 21)
 

COPY D
(for DVD)
5 Main display
6 Copying indicator
7 Digital broadcast indicator
Lights when the unit is receiving digital broadcast or TV Guide
data.
8 Disc indicator
4 5
Disc tray
REC
COPYING COPYING
; <
COPYING COPYING
(for DVD)

RQT9127
7