Deleting All Recordings
Important: Once deleted, contents cannot be recovered.
[RAM]
Perform preparation steps 1−4 of "Accessing the
Management Menus" ( 36).
, select "Delete All
Recordings" then
to select "Yes" then
to select "Start" then
– A message appears when deleting is fi nished.
ENTER
to complete.
Notes
Deleting does not work if one or more recordings are protected.
ENTER
ENTER
ENTER
Formatting Discs
Important: Once formatted, contents cannot be
recovered.
[RAM[ [-RW‹V›] [+RW] [-RW‹VR›]
Perform preparation steps 1−4 of "Accessing the
Management Menus" ( 36).
, to select "Format Disc
(DVD)" then
to select "Yes" then
to select "Start" then
– Formatting starts (
maximum of 70 minutes).
– A message appears when formatting is
fi nished.
ENTER
to complete.
Notes
Do not disconnect the AC power supply cord while formatting. This
can render the disc unusable.
When a disc has been formatted using this unit, it may not be
possible to use it on any other equipment.
[-R] [-R]DL] [+R] [+R]DL] [CD] Formatting cannot be performed.
[-RW‹V›] [-RW‹VR›] You can format only as DVD-Video format on this
unit.
[RAM[ Pressing [RETURN] during format will cancel the process.
The disc must be reformatted if you do this.
[RAM[ The disc cannot be formatted if the write protect tab ( 36)
is switched to "PROTECT". Release the protection to continue.
The message "Unable to format" appears when trying to format
discs the unit cannot use.
ENTER
ENTER
ENTER
may take up to a
[RAM]
37
RQT8849