Copying (Dvd  Vhs) - Panasonic Diga DMR-EZ37 Operating Instructions Manual

Copying (DVD  VHS)
All contents on the disc are automatically copied onto the tape.
[RAM] [-R] [-R]DL] [-RW‹V›] [-RW‹VR›] [+R] [+R]DL] [+RW]  [VHS]
Finalized discs cannot be copied on this unit.
Preparation:
 Turn on the television and select the appropriate video input to suit the
connections to this unit.
 [VHS] Ensure accidental erasure tab is intact.
 Insert a VHS tape with enough space for recording.
 Select the VHS recording mode ( 14).
 Insert the disc containing the program to be copied. Stop the tape at the
point where you want to start copying to.
On the main unit
Press and hold for about 3 seconds.
COPYING COPYING − Check if copying starts properly ("COPY" is
displayed on this unit's display).
− Copying automatically stops when playback of the
disc fi nishes or the tape reaches its end.
Tips
 Additional navigation
You can begin the same kind of copy by using Copy Navigator. Use the operations listed
below instead of the operation shown above.
1. Press [FUNCTIONS].
2. Press [, ] to select "Copy" then press [ENTER].
Copy Navigator screen appears.
3. Press [, ] to select "DVD to VHS" then press [ENTER].
 When you start copying from the selected recording
1. Press [DRIVE SELECT] to select the DVD drive.
2. Press [DIRECT NAVIGATOR].
3. Press [, , , ] to select the recording you want to start, then press [ENTER].
4. Go to the operation shown above.
 Index signals are automatically recorded on the tape according to the division of recordings
on the DVD [ 25, VHS Index Search System (VISS)].
 To cancel copying in the middle
Press [ STOP].
− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying in
the middle.
COPYING COPYING
COPYING indicator
Notes
 If you start copying when the resume
function is activated, the DVD is
copied from the beginning of the
recording you had stopped from.
To copy a whole disc, press [ STOP]
to deactivate it before copying ( 7).
 When copying doesn't start, the
"COPYING" indicator on the main unit
blinks for about 7 seconds. Check if
the unit is properly prepared.
11
RQT8849