Table of Contents
Advertisement
<Connector panel>
q
USB
q USB port
(page 20)
The remote control unit can be
used as a personal computer
mouse by connecting the
projector to a personal computer
with the supplied USB cable.
(4-pin square connector)
w SERIAL connector
(pages 23,
24
and 47)
This connector is used to connect
a personal computer to the
projector in order to externally
control the projector. (RS-232C
compatible)
e RGB1 IN connector
(pages
23
and 24)
This connector is used to input
RGB signals and YP
r RGB2 IN/RGB1 OUT connector
(pages 23,
24
and 44)
This connector is used to input or
output RGB signals and YP
signals. Use the RGB2 SELECT
item in the OPTION menu to
select whether you want input or
output with this connector.
t AUDIO OUT jack
(pages
23
and 24)
This jack is used to output the
audio signals which are input to
the projector. If audio equipment
w
e
P
signals.
B
R
P
B
R
r
t
y
u
o
is connected to this jack, no
sound will be output from the
built-in speaker.
y S-VIDEO IN connector
(pages
23
and 41)
This connector is used to input
signals from a S-VIDEO-
compatible equipment such as a
video deck. The connector is S1
signal compatible, and it
automatically switches between
16:9 and 4:3 aspect ratios in
accordance with the type of
signal being input.
u VIDEO IN jack
(page 23)
This jack is used to input video
signals from a video equipment
such as a video deck.
i AUDIO IN L-R (for VIDEO/S-
VIDEO) jacks
(page 23)
Only one system is provided, so
connect the appropriate
connector when using VIDEO or
S-VIDEO.
o RGB AUDIO IN jack
(pages
23
and 24)
Only one system is provided, so
connect the appropriate
connector when using RGB1 or
RGB2.
i
17
Advertisement
Table of Contents
