Preparation; Start-Up Display - Panasonic PT-LB2U Operating Instructions Manual

Preparation

Start-up display

The LANGUAGE and INITIAL SETTING menu will be displayed when the projector is turned on for the first time or
after it has been initialized. (  page 39)
Navigate the DISPLAY OPTION menu to set the menus in accordance to its application and environment settings.
NOTE:
• When the projector is turned on for the first time, you may be required to adjust the "zoom ring" and "focus ring"
on the top of the projector body to make the menu screen clearer.
For details, see POSITION THE IMAGE. (
LANGUAGE
1
To select the desired language.
INITIAL SETTING
PLEASE SELECT LANGUAGE.
SELECT
2
To proceed to INITIAL SETTING
ENTER
menu.
10  ENGLISH
page 22)

ENTER
INITIAL SETTING
1
To select the desired menu.
 INSTALLATION
 HIGH ALTITUDE MODE
2
To change the settings in the
menu.
INITIAL SETTING
INSTALLATION
HIGH ALTITUDE MODE
SWITCH TO HIGH ALTITUDE MODE "ON" IF OVER 1400m(4593Ft).
RETURN
SELECT
ENTER
INSTALLATION (  page 15, 37)
FRONT/ Put it on a desk or floor and project
from the front
DESK
FRONT/ Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
CEILING
project from the front
REAR/ Put it on a desk or floor and project
from the rear (a translucent screen is
DESK
required)
REAR/ Mount it on the ceiling with a ceiling
mount bracket (sold separately) and
CEILING
project from the rear (a translucent
screen is required)
HIGH ALTITUDE MODE (  page 7, 37)
Use in normal environment
OFF (below 1 400 m (4 593 ft) above sea
level)
ON Use at high altitude
(at 1 400 - 2 700 m (4 593 - 8 858 ft)
above sea level)
3
ENTER
NOTE:
LANGUAGE
• To return to
INITIAL SETTING
menu.
( page 11)

FRONT/DESK
OFF
[RETURN]
menu, press in