Wireless Function Preparation - Panasonic PT-L502 Operating Instructions Manual

Wireless function preparation

The methods of transferring images using a wireless LAN can be broadly
classified into three types according to the environment you are currently
using.
(1) Firstly, when using the wireless function
Insert an optional ET-CDWL1 series wireless card into a computer, and
use Ad Hoc mode so that the computer can carry out direct wireless
communication with the projector.
Computer
Setting procedure
Set the computer and the projector according to the following procedure.
Preparation & settings
<Projector> <Computer>
Inserting the Inserting the
wireless wireless card
card (page (page 27)
18)
Network
settings using
LAN
Wireless
settings
Manager
(page 21)
(page 37)
Setting example
Setting item
IP ADDRESS
SUBNET MASK
MODE
CHANNEL
communication
<Computer>
Use Wireless
Manager to
check
communicatio
n with the
projector
(page 40)
Projector LAN
settings
192.168.10.10 (default)
If using two or more
projectors, use different
addresses for each.
255.255.255.0 (default)
AD HOC
11 (default)
Use the same setting
for the computer.
-14-
Projector
Check
<Computer>
Use Wireless
Manager to
transmit the
images (page
41)
Network settings using
Wireless Manager
computer
Set the address to
something like
192.168.10.11 or
192.168.10.12. Do not
use the same address as
used for the projector.
255.255.255.0
Ad Hoc
11
Use the same setting for
the projector.
Transmit
images
at