Tilt Angle - Panasonic KX-T7737 Quick Reference Manual

Talking Caller ID
You can hear Caller ID information vocally sent from
your PBX through the built-in speaker. The voice volume of
Talking Caller ID depends on the setting of the Ringer volume.
For the Ringer volume, refer to "Ringer volume" on page 16.
ON OFF
TALK CID
Slide the TALK CID Selector to ON to enable the Talking Caller ID
feature.
Note: If the character ":" is included in the Caller ID name, it will not be announced normally.
Therefore, we recommend that you do not use ":" in the Caller ID name.
The tilt angle of the unit can be adjusted.
To adjust the angle, insert the stand into the desired holes as shown below.
< LOW >
Before Operating the Telephone
< HIGH >

Tilt Angle

17