Panasonic KX-T7737 Quick Reference Manual page 15

Proprietary telephone
Table of Contents

Advertisement

PROGRAM: Used to enter and exit the
1
programming mode.
CONF (Conference): Used to establish a
2
multiple party conversation.
INTERCOM: Used to make or receive
3
intercom calls.
FWD/DND (Call Forwarding/Do Not
4
Disturb): Used to perform Call Forwarding
or Do Not Disturb.
FLASH/RECALL: Used for External Feature
5
Access or to disconnect the current call and
make another call without hanging up.
AUTO ANS (Auto Answer)/Mute: Used to
6
answer an incoming call in the hands-free
mode or mute the microphone during a
conversation.
AUTO DIAL/STORE: Used for speed
7
dialing or storing program changes.
REDIAL: Used to redial.
8
DIALING BUTTONS WITH BACKLIGHT:
9
Dialing buttons are backlit (1) when you
receive a call, (2) during a conversation, (3)
when BGM is activated at your phone, or (4)
when you press any button.
10
TRANSFER: Used to transfer a call to
another party.
HOLD: Used to place a call on hold.
11
Location of Controls
SP-PHONE: Used for the hands-free
12
operation.
NAVIGATOR KEY: Used to adjust the
13
volume and the display contrast, or select
desired items.
Programmable Feature (PF) Button:
14
Used as a One-touch Dialing button.
(Button assignment is required.)
Flexible Outside (CO) Line Button:
15
Used to make or answer an outside call.
Pressing this button seizes an idle outside
line automatically. (Button assignment is
required.) Also used as a feature button.
(Button assignment is required.)
PAUSE: Used to insert a pause during
16
dialing.
MESSAGE: Used to leave a message
17
waiting indication, or call back the party
who left the message waiting indication.
Message/Ringer Lamp: The Message/
18
Ringer lamp informs you visually that you
have a message or a call.
When you receive a call, the lamp
flashes depending on the ringing pattern.
When the ringing pattern is set to Single
(Slow flash), Double (Moderate flash), or
Triple (Rapid flash) in your PBX, the lamp
flashes accordingly. When any of the
other ringing patterns are set in your
PBX, the lamp may not flash. (e.g., S-
Double, Call Waiting Tone1.)
When someone has left you a message,
the lamp is lit continuously.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kxt7737b - apits w/talk cid

Table of Contents