Tape Operation - Aiwa CSD-FD82 Operating Instructions Manual

TAPE
POWER STANDBY/
ON6
REPEAT /
MODE/ SLEEP
C

TAPE OPERATION

• Use Type I (normal) tapes only.
• CSD-FD92 plays (records on) both sides.
• CSD-FD82 plays (records on) the side facing up.
PLAYBACK
1
Press TAPE.
The power is turned on.
If the tape has been inserted, play begins.
2
Press PUSH EJECT to open the cassette
holder and insert a tape with the side to
be played facing up and the exposed
side facing forward.
PUSH EJECT
Press PUSH EJECT to close.
3
Press d PLAY/DIR/PRESET (c PLAY/
PRESET) to start playback.
To set the tape counter to "0000"
Press s in stop mode. The counter is also set to
"0000" when opening the cassette holder.
s STOP/CLEAR – Stops play.
a PAUSE/SET – Pauses play. To resume play,
press again.
r/t – Rewinds/ fast forwards. To stop the
winding, press s.
After listening, press POWER STANDBY/ON6 to
turn the power off.
10
ENGLISH
For CSD-FD92
To change the playback side, press d during play.
To select a reverse mode, press * REPEAT/MODE/
SLEEP repeatedly.
* or MODE on the remote control
RECORDING
1
2
Tape counter
3
To record only the selected tracks of a CD
1 Follow steps 1 to 3 of PROGRAMMED PLAY on
2 Press w.
a PAUSE /SET
s STOP /CLEAR
d PLAY / DIR / PRESET
( c PLAY /PRESET)
r, t
w REC / REC MUTE
: Plays the side facing up (indicated for CSD-
FD82 as well).
: Plays the opposite side.
: Plays one side only.
: Plays both sides once. Play stops at the end of
the reverse side.
: Plays both sides repeatedly.
Insert a tape with the side to be recorded
on facing up and the exposed side facing
forward.
For CSD-FD92, press REPEAT/MODE/SLEEP to
select the reverse mode.
: Records on one side only.
or : Records on both sides. Check that
is displayed, so as to start recording from the
side facing up.
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press TUNER/
BAND and tune to a station.
Press w REC/REC MUTE to start
recording.
"REC" flashes on the display.
When the selected function is CD, CD play and
recording starts simultaneously.
page 9 to program tracks.