Advertisement
Table of Contents
- 1 Important Safety
- 2 Installation
- 3 Electric Power
- 4 Damage Requiring Service
- 5 Maintenance
- 6 Power Supply
- 7 Using on AC House Current
- 8 Remote Control
- 9 Specifications
- 10 Radio Operation
- 11 Sound Adjustment
- 12 Presetting Stations
- 13 Programmed Play
- 14 Tape Operation
- 15 Setting the Sleep Timer
- Download this manual
CD STEREO RADIO CASSETTE RECORDER
CSD-FD88
CSD-FD99
© 2003 Sony Corporation
Owner's Record
The model number is located at the bottom and the serial
number is located on the rear.
Record the serial number in the space provided below. Refer
to these numbers whenever you call upon your Aiwa dealer
regarding this product.
Model No.
8C-CHE-932-01
Serial No.
Advertisement
Table of Contents
Related Manuals for Aiwa CSD-FD88
Summary of Contents for Aiwa CSD-FD88
- Page 1 The model number is located at the bottom and the serial number is located on the rear. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Aiwa dealer regarding this product. Model No.
-
Page 2: Important Safety
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN “CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. -
Page 3: Electric Power
INSTRUCTIONS Object and Liquid Entry – Never push objects of any kind into this unit through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. -
Page 4: Power Supply
Power supply OPE/BATT The OPE/BATT indicator lights up while the power is Using on AC house current Connect the AC cord as illustrated below. 1 to the AC inlet of the unit supplied AC cord • The rated voltage of the unit is 120 V AC. •... -
Page 5: Remote Control
/ Output – Headphones jack (stereo mini-jack) / Power output – CSD-FD99: 4.5 W + 4.5 W (JEITA, 3.2 ohms, THD 10% DC). CSD-FD88: 2.5 W + 2.5 W (JEITA, 7 ohms, THD 10% DC). / Power requirements – DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption –... -
Page 6: Radio Operation
RADIO OPERATION Press RADIO BAND * repeatedly to select the desired band. The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected) Press f , g (TUNING -, +) to select a station. -
Page 7: Sound Adjustment
PRESETTING STATIONS You can preset up to 15 stations in each band. Select a station. Press s STOP/SET/CLEAR * once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. Preset number Frequency * or s STOP on the remote control... - Page 8 CD OPERATION Press CD. The power is turned on. Press PUSH OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment. Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a CD-RW disc.
-
Page 9: Programmed Play
PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. In stop mode, hold down s STOP/SET/ CLEAR * until “M” flashes in the display. The program number, “P-01” is also displayed. * or s STOP on the remote control Press f or g to select a track, then press s to store it. -
Page 10: Tape Operation
TAPE OPERATION • Use Type I (normal) tapes only. • The unit plays (records on) the side facing up. PLAYBACK Press TAPE. The power is turned on. Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing up and the exposed side facing forward. -
Page 11: Setting The Sleep Timer
To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Side A Tab for side A SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. - Page 12 UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. (Modèle CSD-FD99 seulement) http: // www.aiwa.com/...