Receivable Broadcast Types - Panasonic Viera TC-22LR30 Operating Instructions Manual

TV Status & Clock Display
1
Press DISPLAY to display or remove the overlay.
1
J U S T 1 2 : 3 4 P M
1 Picture (Aspect) Mode
2 Current Time
3 Channel
4 Receivable Broadcast Types (see right)
5 Sleep Timer time remaining
Channel & Aspect Display
When you change channels or picture (aspect) mode, the
channel number or picture mode will be displayed.
Audio Mode for TV Viewing
Equipped with -TV Noise Reduction for true MTS
reproduction. -TV Noise Reduction is required for good
stereo separation and audio fidelity.
trademark, and is licensed by
1
Press AUDIO to select the desired audio mode as
described above.
• Each press of AUDIO will change the audio mode as shown below.
< Example >
2
3
C H 1 2
STEREO
4
SAP
MONO
5
3 0
N O R M A L
F U L L 1 2 : 3 4 P M C O M P O N E N T
is a registered
Technology Licensing.
STEREO SAP MONO
STEREO SAP MONO
STEREO SAP MONO

Receivable Broadcast Types

The following are possible audio broadcast types and on-screen
displays.
1
Press DISPLAY to display the broadcast signal
being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo broadcast. Select
STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for possible improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub language.
MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select the STEREO or SAP audio
mode.
MONO broadcast:
Normal monaural sound broadcast.
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
J U S T 1 2 : 3 4 P M C H 1 2
STEREO
SAP
MONO
27