Mts Broadcast / Tv Stereo System - Panasonic PV-20DF62 Service Manual

MTS Broadcast / TV Stereo System

®
Equipped with -TV Noise
Reduction for true MTS
®
reproduction. -TV Noise
Reduction is required for good
stereo separation and audio fidelity.
®
is a registered trademark, and
®
is licensed by Technology
Licensing.
OPEN/CLOSE LIGHT
DSS
FM/TV D V D
CABLE
+
ADD/DLT
AUDIO ANGLE SUB TITLE DISPLAY
TITLE MENU
S E T
ACTION RETURN
+
SKIP PLAY SKIP
PAUSE STOP ZOOM
SLOW/SEARCH
< Example >
Press AUDIO
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an "
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast signal being received.
1 2 : 0 0AM
STEREO
SAP
MONO
1 2 : 0 0AM
STEREO
SAP
MONO
AUDIO
1 2 : 0 0AM
STEREO
DISPLAY
SAP
MONO
1 2 : 0 0AM
STEREO
SAP
MONO
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode as
described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
• "SAP" is selected with first press of AUDIO.
1 2 : 0 0AM CH08
STEREO
SAP
MONO
Press AUDIO
" mark while the selected audio mode is indicated
MTS Stereo and SAP broadcast
CH08
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
CH08
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possible improvement.
SAP broadcast
CH08
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
CH08
Normal monaural sound broadcast.
CH08
1 2 : 0 0AM
STEREO
SAP
MONO
Press AUDIO
1 2 : 0 0AM CH08
STEREO
SAP
MONO
19