Arturia BEATSTEP PRO Quick Start page 2

1. SYNC WITH ROLAND DIN-SYNC
First make sure your Beatstep Pro is in 24ppqn mode :
1/ Launch the Midi control center
2/ In "Sync" section "Clock In/Out settings" should be on 24ppq
If not, change the settings to 24ppqn
Beatstep Pro as Slave
Connect the Sync socket of your Roland gear to the Beatstep Pro Clock input using the Black
DIN to Jack adaptator.
USING THE CLOCK IN/OUT
OF YOUR BEATSTEP PRO
2