Advertisement
Quick Links
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH
•
READ ALL INSTRUCTIONS BEFORE STARTING
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Screw the pipes and glass holder onto the base..
STEP 3.
Install the Lamp. This fixture is rated for 60 watttype
Alamp.DO NOT EXCEED RECOMMENDED WATTAGE
STEP 4.
Attach the glass shade onto the glass holder.
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLYANDMOUNTINGDIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN
FOUND.
STEP 5.
Attach the finial onto the glass shade.
STEP 6.
Plug cord into a qualified socket of properly rated voltage.
STEP 7.
On/Off switch installed on cord.
HL459401 TABLE LAMP
Advertisement
Related Manuals for mitzi HL459401
Summary of Contents for mitzi HL459401
- Page 1 HL459401 TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL INSTALLATION. • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE MAINTENANCE. PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
- Page 2 HL459401 TABLE LAMP www.hudsonvalleylighting.com/mitzi| #mymitzi...
- Page 3 HL459401 TABLE LAMP www.hudsonvalleylighting.com/mitzi| #mymitzi...
Need help?
Do you have a question about the HL459401 and is the answer not in the manual?
Questions and answers