mitzi LOLA HL461401 Assembly And Mounting Instructions

ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
• WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
• FAILURE TO INSTALL FIXTURE CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH
• READ ALL INSTRUCTIONS BEFORE STARTING
INSTALLATION
STEP 1. Remove the table lamp and parts from the Carton.
STEP 2.
Screw the rods onto the fixture.
STEP 3. Install the Lamp. This fixture is rated for 4-watt type G9
LED lamp. DO NOT EXCEED RECOMMENDED
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLYANDMOUNTINGDIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
INSTALLATION.
• BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN
FOUND.
WATTAGE
STEP 4. Secure the glass shade onto the glass holder.
STEP 5. Plug cord into a qualified socket of properly rated voltage.
STEP 6. On/Off switch installed on fixture.
HL461401 LOLA LAMP