Advertisement
Available languages
Available languages
Table of Contents
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
•
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
•
SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Install the Lamp. This fixture is rated for 60 watt type G
lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL243201 LYNN TABLE LAMP
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
•
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
STEP 3.
Plug cord into a qualified socket of properly rated
voltage.
STEP 4.
On/Off switch installed on cord.
Advertisement
Table of Contents
Related Manuals for mitzi HL243201
Summary of Contents for mitzi HL243201
- Page 1 HL243201 LYNN TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. • • POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER BEFORE DISCARDING THE CARTON DOUBLE CHECK THE • MAINTENANCE.
- Page 2 HL243201 LYNN TABLE LAMP NOTICE D'ASSEMBLAGE ET DE MONTAGE GENERALITÉ AVERTISSEMENT – TOUJOURS DÉBRANCHER LA LAMPE À LA VEUILLEZ LIRE TOUTE LA NOTICE AVANT DE PROCÉDER À • • PRISE AFIN DE COUPER INTÉGRALEMENT LE CIRCUIT L'INSTALLATION. ÉLÉCTRIQUE AVANT D’INSTALLER, DE NETTOYER OU AVANT DE JETER LA BOÎTE D'EMBALLAGE, CONTRÔLER...
Need help?
Do you have a question about the HL243201 and is the answer not in the manual?
Questions and answers