mitzi BRIELLE HL289401 Assembly And Mounting Instructions

ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the floor lamp and parts from the Carton.
STEP 2. Unscrew the ring to release the glass fitter.
STEP 3. Install the Lamp. This fixture is rated for 60 watt type A
lamp. DO NOT EXCEED RECOMMENDED WATTAGE
STEP 4.
Tilt and rotate the glass shade so that the glass holder
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL289401 BRIELLE FLOOR LAMP
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
into glass shade. Lift metal cup and secure with the metal
ring.
STEP 5. Plug cord into a qualified socket of properly rated
voltage.
STEP 6. On/Off switch installed on cord.