[Intelligent Iso]; [Sensitivity] - Panasonic Lumix DMC-LX3 Operating Instructions Manual

Advanced (Recording pictures)
Note
•
If a RAW picture is recorded with the built-in memory, it will take time to write the picture data.
•
If you delete a RAW file from the camera, the corresponding JPEG image will also be deleted.
•
Refer to P142
•
You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a
file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them
using the software "SILKYPIX Developer Studio" by Ichikawa Soft Laboratory on the CD-ROM
(supplied).
•
[ ] gives a smaller data size for the same file than [
•
The following functions are available when the quality is set to [
–
[CALENDAR]
–
[ROTATE]
–
[PROTECT]
For details on [REC] mode menu settings, refer to P21.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P48 for the flash range.
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
The maximum ISO sensitivity will be set to the value set in [ISO LIMIT SET] when set to [ON].
When the [ISO LIMIT SET] is set to [AUTO], it will be set automatically within the range up to
[ISO800] depending on the brightness.
For details on [REC] mode menu settings, refer to P21.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
[AUTO]/[80]/[100]/[200]/[400]/[800]/[1600]/[3200]
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
Note
•
When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of value set
with [ISO LIMIT SET].
78
VQT1T27
for information about the number of recordable pictures.

[INTELLIGENT ISO]

> [SENSITIVITY]
80
When it is light (outdoors)
Slow
Less
] or [ ].
], [ ] or [
3200
When it is dark
Increased
].
Fast