[Picture Size] - Panasonic Lumix DMC-LX3 Operating Instructions Manual

Advanced (Recording pictures)
[CONTRAST]
[SHARPNESS]
[SATURATION]
[NOISE REDUCTION]
∫ Select the film you would like to use with [MULTI FILM]
Press 2/1 to select [MULTI FILM], and then press 4.
1
Press 3/4 to select multifilms 1 to 3 and press 2/1 to pick
2
out the films you wish to use as the multifilms.
•
One press of the shutter button automatically records the picture to
a selected number of films (up to a maximum of three films).
Note
•
In film mode, the camera may do something equivalent to pull processing or push processing to
create a picture with particular characteristics. The shutter speed may become very slow at this
time.
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [_] or setting the items except
[NOISE REDUCTION] towards [`] to take pictures.
•
When you adjust the film mode, film mode name is displayed in orange on the LCD monitor.
For details on [REC] mode menu settings, refer to P21.
Set the number of pixels. The higher the numbers of pixels, the finer the detail of the
pictures will appear even when they are printed onto large sheets.
Applicable modes:
∫ When the aspect ratio is [4:3].
¢ This item cannot be set in the Intelligent auto mode.
(10M)
¢
(7M )
(5M )
(3M )
¢
(2M )
(0.3M )
76
VQT1T27
Increases the difference between the brightness and the
[_]
darkness in the picture.
Decreases the difference between the brightness and the
[`]
darkness in the picture.
[_] The picture is sharply defined.
[`] The picture is softly focused.
[_] The colors in the picture become vivid.
[`] The colors in the picture become natural.
The noise reduction effect is enhanced. Picture
[_]
resolution may deteriorate slightly.
The noise reduction effect is reduced. You can obtain
[`]
pictures with higher resolution.

@ [PICTURE SIZE]

3648k2736 pixels
3072k2304 pixels
2560k1920 pixels
2048k1536 pixels
1600k1200 pixels
640k480 pixels