Panasonic Lumix DMC-LX3 Operating Instructions Manual page 26

Preparation
[MF ASSIST]
•
Refer to P58 for details.
q [ECONOMY]
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
The status indicator lights while the LCD monitor is turned off. Press any button to turn on the
LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or playback zoom.
•
AV and HD output is turned off while LCD monitor is turned off.
o [AUTO REVIEW]
•
The auto review function is activated regardless of its setting when using auto bracket (P52)/
multi aspect (P53), [MULTI FILM] (P76), [HI-SPEED BURST]
in scene mode, burst mode
pictures cannot be enlarged.)
•
In Intelligent auto mode, the auto review function is fixed to [2SEC.].
•
If [HIGHLIGHT]
when the auto review function is activated.
v [NO.RESET]
•
The folder number is updated and the file number starts from 0001.
•
A folder number between 100 and 999 can be assigned.
26
VQT1T27
In manual focus, the assistance screen appears on the center of
the screen to facilitate focusing on the subject.
[OFF]:
[MF1]:
The center of the screen is enlarged.
[MF2]:
The center of the screen is enlarged over the whole screen.
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
[ZOOM]: The picture is displayed for 1 second and then
(P54) and when recording still pictures with audio (P95). (The
(P25) is set to [ON], white saturated areas appear blinking in black and white
Reset the file number of the next recording to 0001.
The pictures are displayed until one any of the buttons
is pressed.
enlarged 4k and displayed for 1 more second.
(P66) and [FLASH BURST]
(P112)
(P67)