[Iso Limit Set]; [White Balance] - Panasonic Lumix DMC-LX3 Operating Instructions Manual

•
ISO sensitivity will adjust automatically depending on brightness within the maximum setting of
[ISO400] ([ISO1000] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].
•
The setting is not available when [INTELLIGENT ISO] is being used. ([
•
It is recommended to set the ISO sensitivity lower, adjust the [NOISE REDUCTION] under
[FILM MODE] toward the positive side, or adjust the setting for each of the items other than
[NOISE REDUCTION] toward the negative side if the noise is predominant.
For details on [REC] mode menu settings, refer to P21.
Most appropriate sensitivity within the range set will be set depending on the brightness of
the subject.
Applicable modes:
[AUTO]/[200]/[400]/[800]/[1600]/[3200]
Note
•
The upper limit of the ISO sensitivity can be set.
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
•
It will work when the [SENSITIVITY] is set to [AUTO] or [INTELLIGENT ISO] is set to [ON].
For details on [REC] mode menu settings, refer to P21.
In sunlight, under incandescent lights or in other such conditions where the color of white
takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to
what is seen by the eye in accordance with the light source.
Applicable modes:
[AWB]: Automatic adjustment
[V]: When taking pictures outdoors under a clear sky
[Ð]: When taking pictures outdoors under a cloudy sky
[î]: When taking pictures outdoors in the shade
¢
[ ] : When taking pictures with the flash only
[Ñ]: When taking pictures under incandescent lights
[
1
]:
When
using the preset white balance
2
[ ]:
[ ]: When using the preset color temperature setting
¢ It cannot be selected in the motion picture mode.

[ISO LIMIT SET]

= [WHITE BALANCE]

Advanced (Recording pictures)
] is displayed.)
(P74)
VQT1T27
79