Displaying The Time At The Travel Destination - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Displaying the Time at the Travel Destination

If you set your home area and the travel
destination area when traveling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance.
1 Press [MENU/SET] and then
press w.
2 Press r to select the [SETUP]
menu icon [
3 Press e/r to select [WORLD
TIME] and then press q.
SETUP
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
LCD MODE
SELECT
• If you are setting the world time for the
fi rst time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the screen
shown in step 2 in "Setting the home
area [HOME]".
■ Setting the home area [HOME]
(Perform steps 1, 2 and 3.)
1 Press r to select [HOME] and then
press [MENU/SET].
WORLD TIME
DESTINATION
HOME
10:00 JAN. 15. 2008
CANCEL SELECT
Advanced-Shooting
( P17 )
] and then press q.
OFF
EXIT
SET
2 Press w/q to select your home area and
then press [MENU/SET].
Toronto
New York
Miami
Lima
SELECT
• The current time is displayed on the top
left of the screen and the time difference
from GMT (Greenwich Mean Time)
is displayed on the bottom left of the
screen.
• If daylight saving time [
the home area, press e. Press e again
to return to the original time.
• The daylight saving time setting for the
home area does not advance the current
time. Advance the clock setting by one
hour.
Finishing setting the home area
• If you are setting the home area for the
fi rst time, the screen returns to the screen
shown in step 1 of "Setting the home
area [HOME]" after you press [MENU/
SET] to set your home area.
• If the travel is not planned for a long
period of time, press w to return to the
screen shown in step 3 and then press
[MENU/SET] to close the menu.
• Press w to return to the screen shown
in step 3 and then press [MENU/SET] to
close the menu.
• If you are setting the home area for the
second time etc., the screen returns to
the screen shown in step 3 after you
press [MENU/SET] to set your home
area. Press [MENU/SET] again to close
the menu.
CANCEL
SET
] is used at
57
VQT1L50