Displaying The Time At The Travel Destination (World Time) - Panasonic DMC-FX12 Operating Instructions Manual

Displaying the Time at
the Travel Destination
(World Time)
If you set your home area and the travel
destination area when travelling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P15)
1 Press [MENU/SET] and then
press 2.
2 Press 4 to select the [SETUP]
menu icon [ ] and then press 1
3 Press 3/4 to select
[WORLD TIME] and then press 1.
SETUP
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
AUTO REVIEW
SELECT EXIT
• If you are setting the world time for the
first time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the
screen shown in step 2 in "Setting the
home area [HOME]".
∫ Setting the home area [HOME]
(Perform steps
1 Press 4 to select [HOME] and then
press [MENU/SET] to set.
2 Press 2/1 to select your home area
.
and then press [MENU/SET] to set.
/
1
4
n
0
OFF
• The current time is displayed on the top
1SEC.
MENU left of the screen and the time
difference from GMT "Greenwich Mean
Time" is displayed on the bottom left of
the screen.
• If daylight saving time [
the home area, press 3. Press 3
again to return to the original time.
• The daylight saving time setting for the
home area does not advance the
current time. Advance the clock setting
by one hour. (P15)
Advanced (Recording pictures)
1 2 3
, and .)
WORLD TIME
DESTINATION
HOME
10:00 1.DEC. 2007
MENU
SET
MENU
CANCEL SELECT SET
10:00
Rio de Janeiro
Sao Paulo
Buenos Aires
MENU
GMT -3:00
CANCEL
SET
MENU
SELECT SET
] is used at
VQT1C36
57