Scene Mode; (Example: Normal Picture Mode); Rec Mode - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Scene Mode

Set the recording/playback switch to
the recording [ ].
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P47 to 52
modes.
1 Press [MODE], select [SCENE
MODE] using e/r and press
[MENU/SET].

REC MODE

INTELLIGENT
NORMAL PICTURE
SCENE MODE
MOTION PICTURE
SELECT
• If you set [SCENE MENU] in [SETUP]
menu to [OFF], the previous scene mode
is set.
2 Press e/r/w/q to select the
scene mode.
SCENE MODE
BABY1
SELECT
• Press r at A to switch to the next menu
screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3 Press [MENU/SET].
Press [MENU/SET] and then perform steps
2 and 3 to change the scene mode.
46
VQT1L50
Advanced-Shooting
( P18 )
for details about the
SET
SET
A
■ Scene mode help [
• To see explanations about the scene
modes, press [DISPLAY] while a scene
mode is selected in step 2. Press again
to return to the scene mode menu.
INFORMATION
BABY1
Suitable for taking pictures
of your baby.
Age can be displayed
with pictures if you set
the birthday.
CANCEL
• Refer to P41 for the shutter speed.
• Flash settings return to the factory
settings when you change the scene
mode despite it remains still even if the
camera is turned off.
• The color of the picture may seem
strange if you use a scene mode that is
unsuitable for the shot.
• If you press [MENU/SET] to display
the menu screen, [SCN] menu will be
displayed. You can setup recording menu
[ ] or setup menu [
screen.
• The following cannot be set in scene
mode.
– [INTELLIGENT ISO]
– [SENSITIVITY]
– [COLOR MODE]
INFORMATION]
SET
] using r on this