Displaying The Time At The Travel Destination (World Time) - Panasonic DMC-FX12 Operating Instructions Manual

Advanced (Recording pictures)
Displaying the Time at
the Travel Destination
(World Time)
If you set your home area and the travel
destination area when travelling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P15)
1 Press [MENU/SET] and then
press 2.
2 Press 4 to select the [SETUP]
menu icon [ ] and then press 1
3 Press 3/4 to select
[WORLD TIME] and then press 1.
SETUP
CLOCK SET
WORLD TIME
MONITOR
TRAVEL DATE
AUTO REVIEW
SELECT
• If you are setting the world time for the
first time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the
screen shown in step 2 in "Setting the
home are [HOME]".
56
VQT1C27
.
/
1
4
n
0
OFF
1SEC.
MENU
EXIT
∫ Setting the home area [HOME]
1
(Perform steps
1 Press 4 to select [HOME] and then
press [MENU/SET] to set.
WORLD TIME
10:00 1.DEC. 2007
CANCEL
2 Press 2/1 to select your home area
and then press [MENU/SET] to set.
10:00
London
Casablanca
GMT+0:00
SELECT
• The current time is displayed on the top
left of the screen and the time
difference from GMT "Greenwich Mean
Time" is displayed on the bottom left of
the screen.
• If daylight saving time [
the home area, press 3. Press 3
again to return to the original time.
• The daylight saving time setting for the
home area does not advance the
current time. Advance the clock setting
by one hour. (P15)
2 3
, and .)
DESTINATION
HOME
MENU
SET
MENU
SELECT SET
MENU
CANCEL
SET
MENU
SET
] is used at