Using The Playback Zoom - Panasonic Lumix DMC-L10 Operating Instructions Manual

Using the Playback
Zoom
1 Press [
].
2 Rotate the rear dial right to
enlarge the picture.
• 1a>2a>4a>8a>16a
• The magnification becomes lower when
you rotate the rear dial left after
enlarging the picture. The magnification
becomes higher when you rotate the
rear dial right.
• When you change the magnification,
the zoom position indication A appears
for about 1 second so that you can
check the position of the enlarged
section.
3 Press 3/4/2/1 to move the
position.
• When you move the position to be
displayed, the zoom position indication
appears for about 1 second.
∫ To stop using the playback zoom
Rotate the rear dial left or press [MENU/
SET].
A
∫ Switching the displayed image while
maintaining the playback zoom
You can switch the displayed image while
maintaining the same zoom magnification
and zoom position for the playback zoom.
Rotate the front dial during
playback zoom to switch images.
: To move to the previous image.
: To move to the next image.
∫ Deleting a picture during the playback
zoom
1 Press [
].
2 Press 3 to select [YES].
3 Press [MENU/SET].
• Even if the indications on the screen are
turned off in normal playback mode (P48),
the magnification and operation appear on
the screen when the playback zoom is
activated. You can switch between
displaying or not displaying the indications
on the screen by pressing [DISPLAY].
When you set the magnification to 1a, the
indications on the screen are displayed as
in normal playback mode.
• The more a picture is enlarged, the
rougher it becomes.
• If you want to save the enlarged picture,
use the trimming function. (P116)
• The playback zoom may not operate if
pictures have been recorded with other
equipment.
• The zoom magnification and the zoom
position are canceled when the camera is
turned off (including power save mode).
• The zoom position returns to the center in
the following images.
– Images with different aspect ratios
– Images with different numbers of
recorded pixels
– Images with a different rotation direction
(when [ROTATE DISP.] is set to [ON])
Basic
51
VQT1G28