Panasonic Lumix DMC-L10 Operating Instructions Manual page 113

Digital camera/lens kit
Hide thumbs Also See for Lumix DMC-L10:
Table of Contents

Advertisement

• The number of prints can be set from 0
to 999. The DPOF print setting is
canceled when the number of prints is
set to [0].
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting
1 Press 2/1 to select the picture to
print and then press 3/4 to set
the number of prints.
• The number of prints icon [
appears.
• Repeat the above procedure. (You
cannot set all the pictures at one time.)
• The number of prints can be set from 0
to 999. The DPOF print setting is
canceled when the number of prints is
set to [0].
2 Press [MENU/SET] twice to close
the menu.
∫ To cancel all settings
1 Press 3 to select [YES] and then
press [MENU/SET].
2 Press [MENU/SET] to close the
menu.
B
] B
MENU
/SET
∫ To print the date
After setting the number of prints, set/
cancel printing with the recording date by
pressing [DISPLAY].
C
• The date print icon [
• When you go to a photo printing store for
digital printing, be sure to order the
printing of the date additionally if required.
• Depending on the photo printing store or
the printer, the date may not be printed
even if you set to print the date. For further
information, ask at your photo printing
store or refer to the operating instructions
for the printer.
• DPOF is an abbreviation of "Digital Print
Order Format". This feature allows you to
write print information to media and then
use the information on a DPOF-compliant
system.
• DPOF print setting is a convenient
function when printing pictures with a
printer that supports PictBridge. The date
printing setting on the printer may take
priority over the date printing setting on
the camera. Check the date printing
setting on the printer also. (P120)
• Some DPOF information set by other
equipment cannot be used. In such cases,
delete all of the DPOF information and
then set it again with this camera.
• If the file is not based on the DCF
standard, the DPOF print setting cannot
be set. DCF is an abbreviation of "Design
rule for Camera File system", stipulated by
"JEITA (Japan Electronics and Information
Technology Industries Association)".
• Pictures that were taken with the
[QUALITY] set to [RAW] cannot be printed
using DPOF print.
Menu Settings
] C appears.
DATE
113
VQT1G28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc l1 - lumix digital camera slrLumix dmc-l10k

Table of Contents