Attaching/Detaching The Lens - Panasonic Lumix DMC-L10 Operating Instructions Manual

Preparation
Attaching/Detaching
the Lens
• Check that the camera is turned off.
• Close the flash.
∫ Attaching a lens to the camera body
1 Turn the lens rear cap A and the
body cap B in the direction of the
arrow to detach them.
1 1
2 2
A
• Do not put your hands inside the mirror.
2 Align the lens fitting marks C
(red marks) on the camera body
and the lens and then rotate the
lens in the direction of the arrow
until it clicks.
C
• Do not press the lens release button
when you attach a lens.
• Do not try to attach the lens when
holding it at an angle to the camera
body as the lens mount may get
scratched.
• Check that the lens is attached
correctly.
14
VQT1G28
3 Detach the lens cap.
∫ Optical image stabilizer
The supplied lens has an optical image
stabilizer function.
The optical image stabilizer function is set
for activation when the lens is attached to
the camera body.
B
Set the [O.I.S.] switch to [ON].
• You can change the optical image
stabilizer mode to [MODE1], [MODE2] or
[MODE3] using [OIS MODE] in the [REC]
mode menu. (P96) It is set to [MODE1] at
the time of purchase.
• We recommend setting the [O.I.S.] switch
to [OFF] when using a tripod. If the [O.I.S.]
switch is set to [OFF], [
on the LCD monitor.
] is displayed