Panasonic Lumix DMC-L10 Operating Instructions Manual page 140

Others
6: The recorded picture is blurred. The
optical image stabilizer is not
effective.
• The shutter speed will become slower
and the optical image stabilizer function
may not work properly when taking
pictures especially in dark places. In
this case, we recommend holding the
camera firmly with both hands when
taking pictures (P35, 54). We
recommend using a tripod and the
self-timer (P74) when taking pictures
with a slow shutter speed.
7: The recorded picture looks rough.
Noise appears on the picture.
• Is the ISO sensitivity high or the shutter
speed slow?
– Decrease the ISO sensitivity. (P78)
– Set [NOISE RED.] in [FILM MODE]
towards [_] or set every item except
[NOISE RED.] towards [`]. (P92)
– Take pictures in bright places.
• Is [LONG SHTR NR] in the [REC] menu
set to [OFF]? (P103)
8: The picture cannot be recorded with
Live View.
• If you use Live View for a long period of
time or where the temperature is high,
the temperature of the image sensor
will increase. A message may appear
on the screen and Live View may
become unusable. In this case, switch
to using the viewfinder for taking
pictures or turn the camera off for a
short while.
9: A shutter sound is heard twice when
taking pictures with Live View.
• If you press the shutter button fully, the
shutter sound is heard twice and 1
picture is taken. The first shutter sound
is heard when the shutter returns to the
position before a picture is taken and
the second shutter sound is heard
when the picture is actually taken.
140
VQT1G28
10: The shutter sound is heard once
when taking pictures with Live View
however a picture is not taken.
• The shutter sound is heard in auto
focus when the mirror goes down and
then goes up after pressing the shutter
button halfway to enable the camera to
focus or when the shutter button is
released immediately after pressing it
fully. However a picture is not taken.
∫ LCD monitor
1: A flickering vertical line appears on
the LCD monitor under fluorescent
light.
• The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction. This does not
affect the pictures you are recording.
2: The LCD monitor is too bright or
dark.
• Adjust the brightness of the LCD
monitor. (P29)
• Is the camera in Power LCD mode? (P56)
3: Black, red, blue and green dots
appear on the LCD monitor.
• These pixels do not affect the recorded
pictures.
This is not a malfunction. (P135)
4: Noise appears on the LCD monitor.
• In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.