Panasonic Lumix DMC-L10 Operating Instructions Manual page 119

[Windows]
The drive appears in the [My Computer]
folder.
• If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by "Windows Plug and
Play". The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [NO_NAME] or
[Untitled].
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
Card
1 Folder number
2 Color space
3 File number
4 JPG:
RAW:
MISC:
DCIM
100_PANA
1
100_PANA
P1000001.JPG
2 3
P1000002.JPG
P1000999.JPG
101_PANA
999_PANA
MISC
P: sRGB
_: AdobeRGB
Pictures
Pictures in RAW files
DPOF print
Favorite
The items in each folder are as follows.
[DCIM]
[100_PANA]
to
[999_PANA]
[MISC]
• The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
• To reset the file number or the folder
number, select [NO.RESET] in the
[SETUP] menu. (P29)
∫ Conditions under which a different
folder number is used
The picture is not recorded in the same
folder as the previously recorded picture in
the following cases. It is recorded in a folder
4
with a new number.
1 When the folder just recorded to
contains a picture file with the number
999 in it (example: P1000999.JPG).
2 When the card just recorded to
contains, for example, a folder with the
number 100 [100_PANA] in it and that
card is removed and replaced with a
card that has a folder with the number
100 in it recorded by a camera from a
different maker (100XXXXX, with
XXXXX being the name of the maker)
and then a picture is recorded.
3 When recording after selecting
[NO.RESET] (P29) from the [SETUP]
menu. (Pictures will be recorded to a
new folder with a number sequential to
the folder recorded to immediately
before. By using [NO.RESET] on a card
that does not contain folders or
pictures, such as one just formatted,
the folder number can be reset to 100.)
Connecting to other equipment
Folders from [100_PANA] to
[999_PANA]
Pictures/RAW files
Files on which the DPOF
print settings are recorded,
Favorites
119
VQT1G28