Turning The Camera On; Setting Date/Time (Clock Set) - Panasonic Lumix DMC-L10 Operating Instructions Manual

Preparation

Turning the Camera On

Set the camera ON/OFF switch to
[ON].
• The status indicator A lights when you set
the switch to [ON]. The status indicator
blinks if the remaining battery power
becomes low.
• The camera turns off when you set the
switch to [OFF].
Dust reduction function
When the camera is turned on, the dust
reduction function is automatically
activated to shake off any dust on the front
part of the image sensor.
24
VQT1G28
Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
A
appears when you turn the camera on.
A [MENU/SET] button
B Cursor buttons
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the
A Time at the home area
B Time at the travel destination (P129)
2/1:
3/4:
date and time.
Select the desired item.
Set the display order for the
date and time.
: Cancel without setting the
clock.
• You can also use the front dial or the
rear dial to set.
A
B
:
: