Related Manuals for Racing RAC500AGF
Summary of Contents for Racing RAC500AGF
- Page 1 ORIGINAL INSTRUCTIONS >EN ELECTRIC TACKER RAC500AGF USER GUIDE CAUTION: Read the instructions before using the machine!
-
Page 2: Table Of Contents
CONTENTS 1. INTENDED USE ................... 3 2. SAFETY INSTRUCTIONS ................3 3. EXPLANATION OF SYMBOLS ..............7 4. YOUR PRODUCT ..................8 5. TECHNICAL DATA ..................9 6. OPERATION ....................10 7. MAINTENANCE ..................12 8. DISPOSAL ....................12 9. DECLARATION OF CONFORMITY ............13 10. -
Page 3: Intended Use
1. INTENDED USE The tacker enables you to fasten various materials, such as fabric, wood, gauze, cardboard and leather. Therefore, the tool is suitable to upholster furniture, to wrap objects or to repair shoes. 2. SAFETY INSTRUCTIONS 2.1 GENERAL POWER TOOL SAFETY WARNING WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. - Page 4 e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
- Page 5 Power tools are dangerous in the hands of untrained users. e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Page 6 • Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the fastener may be deflected away from your target. • Disconnect the tool from the power source when the fastener jams in the tool. While removing a jammed fastener, the tacker may be accidentally activated if it is plugged in.
-
Page 7: Explanation Of Symbols
• Never aim the tool at people or animals. • Use only staples or nails fit for this tool. • Make sure not to damage any leads when using the tool. 2.5 REPLACING CABLES OR PLUGS • If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. -
Page 8: Your Product
4. YOUR PRODUCT... -
Page 9: Technical Data
1. Reload lever 5. Top 2. Cartridge shaft 6. lock off button 3. Switch 7. Cartridge filling level window 4. Lock on button 8. Safety pin 5. TECHNICAL DATA Rated voltage 220-240V~ Frequency 50Hz Power Number of staples/nails 30/min Staples 8-14mm Nails 15mm... -
Page 10: Operation
6. OPERATION 6.1 APPLICATION (FIG. 2) For this tool, use one of the following length for staples or nails: • Staples: 8-14 mm • Nails: 15 mm 6.2 LOADING THE NAILS OR STAPLES (FIG. 3) • Choose the correct nail or staple for the job. •... - Page 11 6.6 USING THE TACKER After every load test the machine on a piece of scrape. • Press the Lock Off switch (6) to unlock the machine. NOTE: The machine does not work when Lock on switch (4) is pressed. Even though connected to the mains supply.
-
Page 12: Maintenance
7. MAINTENANCE Warning! Make sure that the machine is not live when carrying out maintenance work on the motor. This machine has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning. 7.1 MALFUNCTION Should the machine fail to function correctly, a number of possible causes and the appropriate solutions are given below:... -
Page 13: Declaration Of Conformity
9. DECLARATION OF CONFORMITY BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, Product: Electric Tacker Trade mark: RACING Model: RAC500AGF Serial number: 20210857391-20210862390 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. -
Page 14: Warranty
10. WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 15: Product Failure
11. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Empty the fuel tank. • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Product Failure
12. PRODUCT FAILURE THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 17 BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC 2021...
Need help?
Do you have a question about the RAC500AGF and is the answer not in the manual?
Questions and answers