Related Manuals for Racing RACM300
Summary of Contents for Racing RACM300
- Page 1 ORIGINAL INSTRUCTIONS =>EN MULTIPURPOSE TOOL RACM300 USER GUIDE CAUTION Read the instructions before using the machine.
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS YOUR TOOL ASSEMBLY OPERATION MAINTENANCE DISPOSAL DECLARATION OF CONFORMITY WARRANTY PRODUCT FAILURE WARRANTY EXCLUSIONS... -
Page 3: Safety Warnings
1. SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
-
Page 5: Your Tool
Symbols Refer to the instruction handbook/booklet Wear eyes protection Wear ear protection Wear respiratory protection. Class II protection Intended use This tool is intended to be used for the sanding of little surfaces, corners, edges, for stripping, cutting little pieces in metal, wood or plastics. Do not use this tool for others purposes. -
Page 6: Assembly
Technical data Model RACM300 Power 300W 230-240V˜ 50Hz Voltage Sound power level LwA = 100.2dB(A) K= 3dB(A) Sound pressure level LwA= 89.2dB(A) K= 3dB(A) Vibration 4.464m/s² K= 1.5 m/s² Weight 1.4kg Information: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another;... -
Page 7: Operation
b. Dust extractor Install the hole of the extractor dust around the flange. Screw it with the provided screw. Install the tube on the dust extractor. You will able to install your vacuum device on it. After install the dust extractor, you will able to install the desired accessory c. - Page 8 To stop the operation, push backward the switch button. b. Speed setting Set the speed of the tool by using the speed setting button. Start the job by putting this button on 1 and increase the speed according the operation to do. There are 6 levels of speed, 1 is the lowest and 6 is the highest speed.
-
Page 9: Maintenance
Sanding With sanding accessories, this tool is a detail sander. It is suitable for dry sanding of wood, plastic, and metal surfaces, especially in corners, edges and hard to reach areas. Tips: 1. Work with the complete surface of the sandpaper, not only with the tip. 2. -
Page 10: Disposal
7. DECLARATION OF CONFORMITY CE EC Declaration of conformity BUILDER 32, rue Aristide Bergè s - ZI 31270 Cugnaux – France declare that the machine Designation: MULTIPURPOSE TOOL Model: RACM300 Serial number: 20211021443-20211022942 Is in conformity with the European Directives: Machine Directive 2006/42/EC... -
Page 11: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 12: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 13: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 14 BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC 2021...
Need help?
Do you have a question about the RACM300 and is the answer not in the manual?
Questions and answers