Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Racing RAC12VCOMBI
Summary of Contents for Racing RAC12VCOMBI
- Page 1 ORIGINAL INSTRUCTIONS Cordless multi-tool 12 V - 3 in 1 - Hedge trimmer - Lopping saw - Sabre saw RAC12VCOMBI RAC12VCOMBI-UK USER GUIDE CAUTION Read the instructions before using the machine BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France...
-
Page 2: General Power Tool Safety Warnings
1. General power tool safety warnings WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 3 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
-
Page 4: Hedge Trimmer Safety Warnings
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. - Page 5 Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the workpiece by hand or against your body leaves it unstable and may lead to loss of control. 4. Safety Warnings for charger and batteries To avoid serious injury, risk of fire, explosion and danger of electric shock or electrocution: 1) Do not probe the charger with conductive materials.
-
Page 6: Intended Use
7) Do not recharge the battery pack that has been charged. Overcharging will shorten the battery life. 8) Please charge the battery pack at 4°C- 40°C （39°F- 104°F）room temperature. Please recharge after the hot battery pack is cooled. 9) This charger can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or... - Page 7 6. SYMBOLS The labels on your tools and manual may show symbols. These represent important information about the product or instruction on its use. WARNING! Read the instruction before use Do not expose to rain DANGER – Keep hands away from blade" Wear eye protection Wear gloves Guaranteed noise level 93dB(A)
- Page 8 7. ASSEMBLY INSTRUCTIONS a) Machine components 1. Saw blade 2. Blade quick-lock button 3. Guard board 4. Power display switch 5. Handle swivel button 6. Battery 7. Trigger switch 8. Trigger switch lock button E. Front handle F. Rear handle...
- Page 9 b) Inserting the saw blade Note: the battery must be removed from the tool before inserting the blade. Wear protective gloves during the assembly. Turn and hold the two blade quick-lock buttons to 180°. Insert the blade in the tool. Release the blade quick-lock button. Check if the blade is well inserted in the tool.
- Page 10 e) Checking of the power of the battery pack Press the power display switch. The indicating light displays the remaining power of the battery pack. When the three lights switched on (green, yellow red) the power is above 80%. When the yellow light and the red light are switched on, the power is around 50%; it is recommended to charge the battery When only the red light is switched on, the power is less than 25%;...
- Page 11 8. OPERATING INSTRUCTIONS WARNING: To avoid personal injury: Do not place your fingers or hand between the notches in the blade or in any position where they could get pinched or cut. Wear protective gloves. a) Use Hold the tool with two hands, on the front handle and one the rear handle. Press and hold the trigger switch lock button to the left or right.
-
Page 12: Technical Data
9. Technical Data Model number RAC12VCOMBI/ RAC12VCOMBI-UK Rated voltage 12V d.c. Speed of blade 25 00/min Cutting capacity (reciprocation saw function) Φ100mm(wood) Cutting length (hedge trimmer function) 170mm Maximum cut diameter (hedge trimmer Φ8mm function) Battery type Li-ion battery (DL12-3) Battery pack capacity 2.0Ah... - Page 13 Information: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another; The declared vibration total value may also be used in a preliminary assessment of exposure. Warning: The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used;...
-
Page 14: Maintenance And Storage
10. MAINTENANCE AND STORAGE Keep your tool on a regular basis. This will keep your tool in good working order and extend its lifespan. Do not use abrasive or corrosive agents to clean the tool. These types of products damage your tool. - Page 15 EU’s consistent policy. The statement will prove ineffective if the device is being modified without our approval. Type of instrument: Cordless multi-tool 12 V - 3 in 1 • RAC12VCOMBI • Serial number: 20210738578-20210739077 EU Directives: • EU Machinery Directive 2006/42/EC •...
-
Page 16: Warranty
13. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 17: Product Failure
14. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 18: Warranty Exclusions
15. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...