Changing The Clock Setting - Panasonic Lumix DMC-FH22 Operating Instructions Manual

5
Touch [e]/[r]/[w]/[q] for each item to set year,
month, day, hour, minute, display sequence or
time display format, and touch [SET].
A : Time at the home area
B : Time at the travel destination
4: Cancel without setting the clock.
• Select either [24HRS] or [AM/PM] for the time display
format.
• AM/PM is displayed when [AM/PM] is selected.
• When [AM/PM] is selected as the time display format, midnight is displayed as
AM 12:00 and noon is displayed as PM 12:00. This display format is common in
North America and elsewhere.
6
Touch [SET] to set.
• After completing the clock settings, turn the camera off. Then turn the camera
back on, switch to Recording mode, and check that the display reflects the
settings that were performed.
• When [SET] has been selected to complete the settings without the clock having
been set, set the clock correctly by following the "Changing the clock setting"
procedure below.
Select [CLOCK SET] in the [REC] or [SETUP] menu.
• It can be changed in step 5 to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge
the built-in battery.)
Note
• The clock is displayed when [DISPLAY] is pressed several times during recording.
• You can set the year from 2000 to 2099.
• If the clock is not set, the correct date cannot be printed when you stamp the date on
the pictures with [TEXT STAMP]
• If the clock is set, the correct date can be printed even if the date is not displayed on the
screen of the camera.
Preparation
(P81)

Changing the clock setting

(P103) or order a photo studio to print the pictures.
- 20 -
(P22)
A
q
B
w