Panasonic Lumix DMC-FH22 Operating Instructions Manual page 43

„ Extended Optical Zoom mechanism
„
When you set the picture size to [C] (3 million pixels), the 14M (14.1 million pixels)
CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a
higher zoom effect.
Note
• The Digital Zoom cannot be set when 4 has been selected.
• The indicated zoom magnification is an approximation.
• "EZ" is an abbreviation of "Extended optical Zoom".
• The Optical Zoom is set to Wide (1×) when the camera is turned on.
• If you use the Zoom function after focusing on the subject, focus on the subject again.
• The lens barrel extends or retracts according to the zoom position. Take care not to
interrupt the motion of the lens barrel while the zoom lever is rotated.
• When using the Digital Zoom, [STABILIZER] may not be effective.
• When using the Digital Zoom, we recommend using a tripod and the self-timer
taking pictures.
• The Extended Optical Zoom cannot be used in the following cases.
– In Macro Zoom Mode
– In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST] or
[PHOTO FRAME] in Scene Mode
– In Motion Picture Mode
• [DIGITAL ZOOM] cannot be used in the following cases:
– In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST],
[FILM GRAIN] or [PHOTO FRAME] in Scene Mode
Basic
- 43 -
(P57) for