Repeat Playback; Resuming The Previous Playback - Panasonic HDC-SD10 Operating Instructions Manual

∫ Playback time setting
Touch the playback time to set.
≥ The playback time of [AUTO] is a maximum of
approx. 5 minutes.
≥ Playback time may become shorter than the
setting, or it may not even play back if the part
recognized as clearly recorded is short.
∫ Music setting
1) Touch your favorite music.
≥ When [NO MUSIC] is selected, the audio
recorded at the time of shooting is played back.
2) Touch [ENTER].
To test the music audio:
Touch [START] and start the audio testing.
≥ Touch the other music option to change the
music to be tested.
≥ When you touch [STOP], the music playback
stops.
≥ When you touch [ENTER], the music being
tested is set.
≥ The scene in the vicinity of the split may not
play back when the scene is split. (l 82)
≥ Playing back of all the scenes returns if the
power is turned off or the mode is changed.
76
VQT2D01

Repeat playback

Playback of the first scene starts after playback
of the last scene finishes.
Select the menu. (l 29)
[VIDEO SETUP] # [REPEAT PLAY] # [ON]
The indication appears on the full screen
views.
≥ All the scenes are played back repeatedly.
(When playing back motion pictures by date,
all the scenes on the selected date are played
back repeatedly.)
Resuming the previous
playback
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
Select the menu. (l 29)
[VIDEO SETUP] # [RESUME PLAY] # [ON]
If playback of a motion picture is stopped,
appears on the thumbnail view of the stopped
scene.
≥ This function's default setting is [ON].
≥ The memorized resume position is cleared if
you turn off the power or change the mode.
(The setting of [RESUME PLAY] does not
change.)