Intelligent Auto Mode - Panasonic HDC-SD10 Operating Instructions Manual

Intelligent auto mode

The following modes appropriate for the condition are set just by pointing the unit to what you want to
record.
≥ When this unit is purchased, the Intelligent auto mode is set to on.
Mode
Portrait
Scenery
Spotlight
Low light
Scene/Effect
When the object is a
person
Faces are detected
and focused
automatically, and the
brightness is adjusted
so it is recorded
clearly.
Recording outdoors
The whole landscape
will be recorded
vividly without whiting
out the background
sky, which may be
very bright.
Under a spotlight
Very bright object is
recorded clearly.
Dark room or
twilight
It can record very
clearly even in a dark
room or twilight.
Intelligent auto button
Press this button to switch on/off the
Intelligent auto mode.
Mode
Normal
≥ Modes are selected automatically by the unit,
so it may not choose desired mode depending
on the recording conditions.
≥ Brightness may change suddenly or flicker
when set to on.
≥ In the Portrait mode, a subject that is bigger
and close to center of the screen will be
surrounded by an orange frame. (l 59)
≥ Optical image stabilizer function (l 50) is set
to Active mode/ON in all modes.
≥ The setting of microphone level is fixed to
[AUTO].
≥ In the following case, faces may not be
detected in some recording conditions.
jFaces are not full-faces
jFaces tilt
jFaces are not completely exposed (for
instance wearing sunglasses)
jThe size of a face is small on the screen
jWhen the digital zoom is used
≥ The function may not operate properly in some
recording conditions, even if faces are
detected.
Scene/Effect
Other situations
Contrast is adjusted
automatically for clear
image.
39
VQT2D01