Download
Share
Print this page
Simrad FX80 Operator's Manual
  1. Manuals
  2. Brands
  3. Simrad Manuals
  4. Measuring Instruments
  5. FX80
  6. Operator's manual
Simrad FX80 Operator's Manual

Simrad FX80 Operator's Manual

Catch monitoring system with live video feed
Hide thumbs Also See for FX80:

Advertisement

Quick Links

Download this manual
Operator Manual
Simrad FX80
Catch monitoring system with live video feed
TECHNOLOGY FOR SUSTAINABLE FISHERIES
www.simrad.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the FX80 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Simrad FX80

Summary of Contents for Simrad FX80

  • Page 1 Operator Manual Simrad FX80 Catch monitoring system with live video feed TECHNOLOGY FOR SUSTAINABLE FISHERIES www.simrad.com...
  • Page 3 Simrad FX80 Catch monitoring system Operator Manual Release 2.3.1 This manual provides you with the basic information required to operate the Simrad FX80 Catch monitoring system. 977-00017041/1.0 November 2019 © Kongsberg Maritime AS...
  • Page 4 If you require maintenance or repair, contact your local dealer. You can also contact us using the following address: simrad.support@simrad.com. If you need information about our other products, visit https: //www.simrad.com. On this website you will also find a list of our dealers and distributors. Kongsberg Maritime AS www.kongsberg.com...

  • Page 5: Table Of Contents

    GETTING STARTED ..............20 Read this first ........................21 Turning the FX80 on and off ...................22 Turning on the entire FX80 system for the first time ..........23 Turning off the FX80....................27 Installing the FX80 operational software.................28 Setting up the Ethernet communication................29 Starting normal operation ....................31...
  • Page 6 Record button description ..................57 Navigational information ..................58 Messages button description ..................59 Help button description ..................59 Operating system button descriptions ..............60 The FX80 menu system ....................61 Status bar..........................62 MENU SYSTEM ............... 63 About the menus and menu buttons.................64 Using the “smart” menu buttons ..................64 Operation menu........................65...

  • Page 7: About This Manual

    Target audience This manual is intended for all regular users of the FX80. Due to the nature of the descriptions and the level of detail provided by this manual, it is well suited for those who use the FX80 on a daily basis, and have access to expert users for advice.
  • Page 8 Microsoft Corporation in the United States and other countries. We want your feedback We want to improve FX80 continuously. We also want our end-user documentation to be comprehensive and relevant. You can help. Please provide comments, suggestions or constructive criticism to any of our support offices.

  • Page 9: Simrad Fx80

    Simrad FX80 Simrad FX80 Topics Important, page 8 System description, page 9 Key features, page 10 System diagram, page 11 System units, page 13 Network security, page 17 Support information, page 18 977-00017041/1.0...

  • Page 10: Important

    Exit Note If you turn off the FX80 by means of the on/off switch on the Processor Unit you may damage the software and the interface settings used to communicate with external devices. Rules for Sonar Head handling A Sonar Head must always be handled as a delicate instrument.

  • Page 11: System Description

    One of the primary design criteria of the Simrad FX80 system was to make it work on existing third-wire cables. We have achieved this goal by using existing copper-core coax cables to ease the cost and reduce installation time.

  • Page 12: Key Features

    Simrad FX80 Operator Manual Key features By innovative use of high-resolution real-time video, the Simrad FX80 offers unique features to make your trawler operations more efficient. • Revolutionizes your ability to identify, analyze and catch • Live video feed from inside the trawl •...

  • Page 13: System Diagram

    Simrad FX80 System diagram The system diagram identifies the main components of a basic FX80 system. Only the main connections between the units are shown. Detailed interface capabilities and power cables are not shown. The system comprises the following units and main parts:...
  • Page 14 This fourth wire is supplied by Simrad. The required length can be decided at the time of purchase, or lengths can be added at a later time. The system itself is not set for any particular length.

  • Page 15: System Units

    Simrad FX80 System units Topics Processor Unit, page 14 Bridge Control Unit, page 15 Trawl Unit, page 15 Camera Unit, page 16 977-00017041/1.0...

  • Page 16: Processor Unit

    In this publication, the computer is referred to as the Processor Unit. The Processor Unit is the computer that controls the FX80 system. It is a vital part of the FX80 Catch monitoring system. The Processor Unit contains the operational software, and offers the user interface that allows you to control the FX80.

  • Page 17: Bridge Control Unit

    The Trawl Unit is made up of several components, including the DFS75 Sonar Head and Communication Hub, enclosed in a Deployment Pack. The Trawl Unit’s Deployment Pack is the main underwater container for the Simrad FX80 system. It is made from polyurethane and has been designed for tough use in the harshest of environments, yet it is easy to handle.

  • Page 18: Camera Unit

    The Camera Unit is the assembly that contains the underwater monochrome camera and the powerful LED lamp. The ambient light conditions may be poor in deep water. For this reason, the FX80 Camera Unit has been fitted with a powerful LED lamp. The Camera Unit is normally mounted inside the trawl opening, or above the cod end.

  • Page 19: Network Security

    Securing the FX80 system itself has no meaning unless there is a policy in place that secures all computers in the network. This policy must include physical access by trained and trusted users.

  • Page 20: Support Information

    Simrad FX80 Operator Manual Support information If you need technical support for your Simrad FX80 you must contact your local dealer, or one of our support departments. A list of all our offices and dealers is provided on our website. You can also contact our main support office in Norway.
  • Page 21 Simrad FX80 Canada • : Kongsberg Mesotech Ltd. Company name • : 1598 Kebet Way, Port Coquitlam, BC, V3C 5M5, Canada Address • : +1 604 464 8144 Telephone • : +1 604 941 5423 Telefax • https://www.simrad.com Website •...

  • Page 22: Getting Started

    Simrad FX80 Operator Manual Getting started Topics Read this first, page 21 Turning the FX80 on and off, page 22 Installing the FX80 operational software, page 28 Setting up the Ethernet communication, page 29 Starting normal operation, page 31 Context sensitive on-line help, page 35...

  • Page 23: Read This First

    "Getting started" is all about setting up the FX80 Catch monitoring system for the first time. This can be because the FX80 has just been unpacked or installed. You may also be a first time user on an existing system.

  • Page 24: Turning The Fx80 On And Off

    Simrad FX80 Operator Manual Turning the FX80 on and off Topics Turning on the entire FX80 system for the first time, page 23 Turning off the FX80, page 27 977-00017041/1.0...

  • Page 25: Turning On The Entire Fx80 System For The First Time

    Turning on the entire FX80 system for the first time In order to use the FX80, you must first turn it on. You must first power up the Bridge Control Unit, and then the Processor Unit. After this you can start the FX80 program. If you have a Sonar Head connected to your FX80 system, it is usually started once the Communication Hub is online and operational.
  • Page 26 Simrad FX80 Operator Manual Procedure Important When turning on the FX80 for the first time, use the test cable. After you have made sure the system works with the test cable, repeat this power-up procedure using the third-wire cable. Power up the Bridge Control Unit.
  • Page 27 Getting started At the bottom of the FX80 presentation, verify that the camera is connected. The current connection speed between the Bridge Control Unit and the Communication Hub is also shown. The speed depends on the length and quality of the third-wire cable.
  • Page 28 Simrad FX80 Operator Manual Observe that the menu opens. Setup Click the button. Connect Sonar Observe that the dialog box opens. Connect Sonar In the list, select the port your Sonar Head is connected to. Devices If the expected port does not appear at first, click the...

  • Page 29: Turning Off The Fx80

    Exit Context When you do not use the FX80, turn off the display and the Processor Unit. It is important that you disconnect the high voltage power to the Communication Hub. To disconnect the high voltage power, switch off the Bridge Control Unit.

  • Page 30: Installing The Fx80 Operational Software

    If your FX80 Catch monitoring system is provided with a Processor Unit, the FX80 software has already been installed. If you intend to use your own computer, you must install the software yourself. When a new FX80 software version is released, it must be installed on your Processor Unit.

  • Page 31: Setting Up The Ethernet Communication

    As long as you do not change the Processor Unit to another computer, or replace the network adapter in your Processor Unit, you will only need to do this once. Procedure On the Processor Unit, close the FX80 software. Open the dialog box.
  • Page 32 Simrad FX80 Operator Manual Select , and type the IP address and network mask. Use the following IP address IP Address: 10.0.0.1 Subnet mask: 255.255.255.0 Default gateway: 10.0.0.5 Select to save the settings, then close all the dialog boxes. 977-00017041/1.0...

  • Page 33: Starting Normal Operation

    Getting started Starting normal operation Topics Starting the live video feed, page 32 Controlling the ambient light conditions for the camera, page 32 Recording video sequences, page 33 Replaying previously recorded video sequences, page 34 977-00017041/1.0...

  • Page 34: Starting The Live Video Feed

    Simrad FX80 Operator Manual Starting the live video feed The main purpose of the FX80 is to provide a real-time video feed from the chosen location on the fishing net. Provided that the FX80 units have been powered up with the necessary items correctly positioned, you can easily start and stop the video feed.

  • Page 35: Recording Video Sequences

    Getting started Recording video sequences The main purpose of the FX80 is to provide a real-time video feed from the chosen location on the fishing net. The function allows you to record the video feed Record received by the camera.

  • Page 36: Replaying Previously Recorded Video Sequences

    Simrad FX80 Operator Manual Replaying previously recorded video sequences function allows you to recall any previously recorded video file to see it one Replay more time. The video playback is controlled from the function on the Replay Operation menu. Context During replay, the phrase "REPLAY"...

  • Page 37: Context Sensitive On-Line Help

    The FX80 help may not be available for the language you have chosen for the user interface. If your language is not supported, the English help is provided. 977-00017041/1.0...

  • Page 38: Operating Procedures

    Simrad FX80 Operator Manual Operating procedures Topics Setting up your system, page 37 Using the video feed, page 44 Interfacing peripheral equipment, page 51 977-00017041/1.0...

  • Page 39: Setting Up Your System

    Operating procedures Setting up your system Topics Reducing the light emitted from the display presentation, page 38 Monitoring the communication link, page 38 Optimizing video performance, page 40 Compensating for camera rotation, page 42 Compensating for fourth-wire signal loss, page 42 977-00017041/1.0...

  • Page 40: Reducing The Light Emitted From The Display Presentation

    Simrad FX80 Operator Manual Reducing the light emitted from the display presentation When the bridge is dark, the light emitted by the FX80 display can affect your night vision. In order to compensate for this, you can reduce the intensity Context The intensity of the light given off by the FX80 presentation can be adjusted.
  • Page 41 Line Rate - Upstream Control Unit to the Communication Hub in the Trawl Unit. The same information is provided on the in the bottom-left corner of the FX80 presentation. Status Bar • : This is the current communication speed from the Line Rate - Downstream Communication Hub in the Trawl Unit to the Bridge Control Unit.

  • Page 42: Optimizing Video Performance

    – Not Authenticated: The camera is either not connected to the Communication Hub, or you have attempted to connect a third-party camera. The camera supplied with the FX80 system is constantly polled by the Communication Hub with an authentication request. Other third-party cameras can therefore not be used.
  • Page 43 Operating procedures Important Do not modify parameters while you are using Live Feed mode. System Setup Procedure Select the icon. Setup The icon is located under the menu. Main Click the button. System Setup Click the tab. Video Encoder If required, change the Resolution This parameter is used to determine video resolution during the live feed and recording.

  • Page 44: Compensating For Camera Rotation

    Simrad FX80 Operator Manual Compensating for camera rotation During installation, you may not be able to install the FX80 camera in the basic upright position. Also, during operation, the camera may inadvertently be rotated. Context page allows you to define the main parameters for live feed, video Video Encoder recording and playback.
  • Page 45 Unfortunately, a long cable will always result in some signal loss, and such loss is annoying on any video system. In order to compensate for a long cable, the FX80 offers parameter. Using this parameter, you can enter the approximate Long Line Drive length of the cable, so that the software can compensate automatically.

  • Page 46: Using The Video Feed

    Simrad FX80 Operator Manual Using the video feed Topics Starting the live video feed, page 45 Controlling the ambient light conditions for the camera, page 45 Recording video sequences, page 46 Replaying previously recorded video sequences, page 47 Exporting video recordings, page 48 Enabling video overlays, page 49 977-00017041/1.0...

  • Page 47: Starting The Live Video Feed

    Operating procedures Starting the live video feed The main purpose of the FX80 is to provide a real-time video feed from the chosen location on the fishing net. Provided that the FX80 units have been powered up with the necessary items correctly positioned, you can easily start and stop the video feed.

  • Page 48: Recording Video Sequences

    Simrad FX80 Operator Manual Recording video sequences The main purpose of the FX80 is to provide a real-time video feed from the chosen location on the fishing net. The function allows you to record the video feed Record received by the camera.

  • Page 49: Replaying Previously Recorded Video Sequences

    The video playback is controlled from the function on the Replay Operation menu. Context During replay, the phrase "REPLAY" is shown with red characters at the bottom of the FX80 presentation. Procedure Select the icon. Operation It is used to open the menu.

  • Page 50: Exporting Video Recordings

    Exporting video recordings functionality allows you to export the video sequences – either in full Export Video or an excerpt – you have recorded on the FX80 to another video format. Context functionality provided by the FX80 software will only work with Export Video video sequences recorded by the FX80.

  • Page 51: Enabling Video Overlays

    GPS Time Navigation information is available only if the relevant sensors are connected to the FX80 system. The overlay appears during playback by default. You can also set it up so that the current overlay data is placed on top of the live feed during the presentation. When a video...
  • Page 52 Simrad FX80 Operator Manual • : Provided by the computer clock. Date • : Provided by the computer clock. Time • : Vessel’s geographical position as provided by the navigation system. Position • : Vessel’s current heading as provided by the navigation system.

  • Page 53: Interfacing Peripheral Equipment

    Operating procedures Interfacing peripheral equipment Topics Setting up the input from a navigation system (GPS), page 52 Synchronizing to the GPS clock, page 53 977-00017041/1.0...

  • Page 54: Setting Up The Input From A Navigation System (Gps)

    Several external sensors(GPS navigation, gyro compass etc) may be connected to the FX80 to provide information about the vessel's speed, position, heading and sailed distance. The FX80 must be set up to receive this information. Procedure Select the icon.

  • Page 55: Synchronizing To The Gps Clock

    This time information can be used by the FX80 system for clock synchronization. Context If GPS Time has been enabled, the FX80 software will display the time directly received from the GPS regardless of the current computer time. If this function has been enabled and no GPS time is available, the FX80 software will continue displaying the computer time.

  • Page 56: User Interface

    Simrad FX80 Operator Manual User interface Topics Display organization, page 55 Top bar overview, page 56 The FX80 menu system, page 61 Status bar, page 62 977-00017041/1.0...

  • Page 57: Display Organization

    This FX80 screen capture shows you a typical operational situation. Top bar The FX80 top bar is located at the top of the display presentation and stretches from the far left to the far right. The top bar gives you fast access to key functionality and navigational information.

  • Page 58: Top Bar Overview

    Simrad FX80 Operator Manual Top bar overview The FX80 top bar is located at the top of the display presentation and stretches from the far left to the far right. The top bar gives you fast access to key functionality and navigational information.

  • Page 59: Menu Button

    Menu Menu Screen Capture button description When you use the FX80 actively, you may need to make a screen capture to save an instantaneous image of the current presentation. Description Select to make a copy of the current video frame.

  • Page 60: Navigational Information

    Setup Description If a positioning sensor (GPS) is connected to the FX80, the top bar can show you the vessel's geographical position in longitude and latitude. Note The information shown on the FX80 top bar must not be used for vessel navigation.

  • Page 61: Messages Button Description

    Setup Description Provided that a speed log sensor is interfaced to the FX80, the vessel’s current speed can be presented in the user interface. By default, the vessel speed is shown in knots. Messages button description button is located on the right side of the top bar.

  • Page 62: Operating System Button Descriptions

    You navigate in the help file using the menu system on the left side as well as the interactive links within the document. Help is also available from the various dialog boxes in the FX80 user interface. Select [?] in the top right corner of a dialog box to open the context-sensitive help.

  • Page 63: The Fx80 Menu System

    User interface The FX80 menu system The menu system is by default located on the right side of the FX80 presentation. Each menu provided by the FX80 contains several menu buttons. Some of the menu buttons open dialog boxes or submenus to offer additional choices.

  • Page 64: Status Bar

    Simrad FX80 Operator Manual Status bar The status bar is located at the bottom of the FX80 presentation. The status bar allows you to view the connection speed and system status. Connection Speed This status message provides you with the current transmission speed between the Bridge Control Unit and the Communication Hub.

  • Page 65: Menu System

    Menu system Menu system Topics About the menus and menu buttons, page 64 Using the “smart” menu buttons, page 64 Operation menu, page 65 Display menu, page 66 Setup menu, page 67 977-00017041/1.0...

  • Page 66: About The Menus And Menu Buttons

    Simrad FX80 Operator Manual About the menus and menu buttons To select operational parameters on the FX80, use the menu system. Some of the menu buttons open dialog boxes or submenus to offer additional choices. The menu system is by default located on the right side of the FX80 presentation.

  • Page 67: Operation Menu

    • Select to close the dialog box without making any changes. Cancel Operation menu menu offers the most common functions for basic FX80 operation. Operation How to open Select the icon.

  • Page 68: Display Menu

    • About dialog box identifies the current FX80 software version with its release About date. This dialog box also identifies the software version, product number, and serial number for both the Communication Hub and the FX80 camera.

  • Page 69: Setup Menu

    • System Setup dialog box allows you to define the main functional parameters System Setup for the FX80 system. These settings include the video encoder, NMEA interfaces, and ADSL router parameters. 977-00017041/1.0...
  • Page 70 Simrad FX80 Operator Manual Index monitoring ..........38 compensating about for camera rotation........42 comments ..........6 for signal loss..........42 constructive criticism........6 computer context sensitive on-line help ......5 introduction ..........14 document downloads ........5 overview ..........14 feedback............
  • Page 71 Index turn off ............ 27 turn on ............. 23 echogram presentation use the menu buttons ........64 description ..........55 how to open enabling Display menu..........66 video overlays ..........49 Operation menu .......... 65 Ethernet interface Setup menu ..........67 network adapter ..........
  • Page 72 Simrad FX80 Operator Manual purpose ............ 65 open............5 location online top bar ............. 58 information ..........5 logo open registered trademark........6 context sensitive on-line help ......5 top bar ............. 56 Display menu..........66 longitude Operation menu .......... 65 top bar .............
  • Page 73 ............57 purpose ............. 5 signal loss target audience ..........5 compensating for......... 42 purpose Simrad About dialog box ........66 registered trademark........6 Bridge Control Unit ........15 support ............ 18 Camera Unit ..........16 SIMRAD computer ..........14 registered trademark........
  • Page 74 Simrad FX80 Operator Manual Maximize button ......... 60 menu hide/show.......... 57 Messages button ......... 59 Minimize button ......... 60 navigational information........ 58 Normalize button ........60 Power Off button......... 60 product name ..........56 record indicator .......... 57 screen capture ..........57 vessel speed..........
  • Page 76 ©2019 Kongsberg Maritime...