Powering On/Off The Projector; Powering On The Projector - Optoma TX776 User Manual

 Turn on the
projector first and
then select the
signal sources.

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected.  The Power LED will be Red.
3. Turn on the lamp by pressing " " button either on the top
of the projector or on the remote. The Power LED will flash
Blue.
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, press the

"Source" button on the control panel to switch between
inputs.
Installation
Power/Standby
2
Power LED
Lens Cap
1
5
English