Control Panel & Remote Control
There are two ways for you to control the functions:
Control Panel and Remote Control.
Control Panel
Using the Control Panel
Power
Standby
Power LED
Enter
Menu
Re-Sync
Source
Four Directional
Select Keys
Keystone
Lamp LED
Temp LED
User Controls
Refer to the "Power On/Off the Projector" section
on pages 15-16.
Indicate the projector's status.
Confirm your item selection.
Press "Menu" to launch the on-screen display (OSD)
menu. To exit OSD, Press "Menu" again.
Automatically synchronize the projector to the input
source.
Press "Source" to select an input signal.
Use
to select items or make adjustments
to your selection.
Use
to adjust image distortion caused by
tilting the projector. (
Indicate the projector's lamp status.
Indicate the projector's temperature status.
±16 degrees)
9
English