Powering Off The Projector; Warning Indicator - Optoma PRO160S User Manual

Installation
Contact the

nearest service
center if the
projector displays
these symptoms.
See pages
57-58 for more
information.
14
English

Powering Off the Projector

1. Press the "POWER" button to turn off the projector lamp.
The following message will be displayed on the screen.
Press the "POWER" button again to confirm, otherwise
the message will disappear after 15 seconds.
When you press the "POWER" button a second time, the
system will show the countdown timer on the screen.
2. The cooling fans continue to operate for about 10 seconds
for cooling cycle. When the Power LED turns Amber, the
projector has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press "POWER" button to restart the projector.
3. Disconnect the power cord from the electrical outlet and
the projector.
4. Do not turn on the projector immediately following a power
off procedure.

Warning Indicator

When the warning indicators (see below) come on,
the projector will automatically shutdown:
"LAMP" LED indicator is lit red and if "POWER" indicator

flashes amber.
"TEMP" LED indicator is lit red and if "POWER" indicator

flashes amber. This indicates the projector has overheated.
Under normal conditions, the projector can be switched
back on.
"TEMP" LED indicator flashes red and if "POWER" indica-

tor flashes amber.
Unplug the power cord from the projector, wait for 30 seconds
and try again. If the warning indicator light up again, please
contact your nearest service center for assistance.