HermanMiller Bay Installation Instructions Manual

HermanMiller
Bay Installation Instructions
How to assemble your Bay
Tools Required
Driver T25 Torx
driver bit
Allen keys Panel Lifter
Card for
threshold Knife
Safety Notes
PRODUCT ELECTRICAL RATING: 120 V 60 HZ 12 A
WARNING Risk of Injury - maximum load 50 lb for worksurface, maxi-
:
mum load 20 lb for monitor mount
CEILING/ROOF: This surface is not designed for any type of load. Do not
put any objects on this surface.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always
be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING.
DANGER: To reduce the risk of electrical shock:
1. Always unplug this furnishing from the electrical outlet before clean-
ing or servicing.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to
persons:
HermanMiller Bay Installation
Extended Drill bit 4mm
#2 Cross head or 0.16"
driver bit
Level Square
Spanner Ladder
Parts Included
Panels
Door Hinges
Hub
Worktop & Brackets
User Power
AC Splitter
DC Power Supply Occupancy indicator
(Optional)
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or
near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manu-
facturer.
4. Never operate this furnishing if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or damaged, or
dropped into water. Return the furnishing to a service center for
examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the furnishing with the air openings blocked. Keep
the air openings free of lint, hair, and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove
plug from outlet.
1 1BXFRM rev B
Lintel Threshold
Ventilation
Roof
Box
Door Handle
Monitor Plate &
Brackets(Optional)
Cable Tray
Dimmer
Assembly kit - Roof seal,
Threshold tape, Latch, Hinge
shims, P-clips, Screws
Assembly Instructions
Lights
Door