Rotenso CONTROL Series User Manual page 18

Control Module - RCU-AHUBOX-1C R14
GENERAL INFORMATION
1. PRECAUTIONS
1.1 When installing
• The installation, disassembly, handling and repair of this equipment must be performed by specialist
personnel who have the appropriate training, qualifications and licenses for this type of work. Incorrect
assembly, disassembly, relocation and repair can cause a fire, electrical shock, injury or damage due to
electric shock, falling objects, leaks or explosions etc.
• The surface where the equipment is installed and secured and the mounting of the equipment must be
designed for the weight of the equipment.
• Use power and signal cables with suitable size in accordance with the equipment specifications, manuals,
and national regulations and standards.
• Do not plug more than one piece of equipment into the same power supply. Do not modify the power cord.
If the power cord or plug is damaged, contact customer service for replacement.
• The fuse or circuit breaker should be sized for the capacity of the equipment. The equipment must be
properly grounded.
• The power supply should have leakage current protection. Failure to provide leakage current protection
may result in electric shock.
• Do not turn on the power until installation work is complete.
• Do not install or use the equipment in areas with a potentially explosive atmosphere. Use or storage of
flammable materials, liquids or gases in the vicinity of the equipment may result in fire.
• Ventilate the room thoroughly during installation.
• Be sure the drain piping is properly installed and connected. An incorrect connection may result in leakage
and property damage.
• Do not install the equipment above computers, office equipment, or other electrical equipment.
Condensation may result in damage to the equipment in the event of a condensate leak.
1.2 During Operation
• If the equipment is not in operation, check to be sure that the air filler is properly installed before operating
the equipment.
• If the equipment has not been in operation for an extended period of time, it is recommended that it be
inspected and repaired before operating the equipment.
• If air filter have been inoperative for a long time, it is recommended that the filter be cleaned before use.
• Do not turn the equipment on or off by plugging in or unplugging it.
• Do not pull the power cord when unplugging it from the wall outlet. Doing so may damage the cable.
• Do not use the equipment for purposes other than those for which it is intended. This equipment is not
designed to store precision instruments, food, or artifacts, or the housing of animals or plants.
• Do not expose yourself to cold air flow. Do not expose pets or plants to hot air for long periods of time.
• Do not put your hands or other body parts or objects into the air inlet or outlet.
• The fan blades rotate at high speed, a caught object can cause njury or damage the equipment.
• Watch out for small children and keep an eye on the air inlet and outlet.
• Pay close attention to small children and keep them from playing near the equipment.
• If there is any sign of malfunction (smell of burning, loud noise, etc.), please turn off the equipment
immediately. Use of such equipment may result in fire, malfunction, etc.
18
User manual