Selecting A Source; Selecting The Computer Or Video Source - NEC NP1250 User Manual

 Selecting a Source

Selecting the computer or video source

Selecting from Source List
Press and quickly release the SOURCE button on the projector cabinet to dis-
play the Source list. Each time the SOURCE button is pressed, the input source
will change as follows: "COMPUTER 1/2/3", "COMPONENT", "VIDEO" (VCR),
"S-VIDEO", "VIEWER" (slides on a USB memory) or "NETWORK" (LAN port
[RJ-45] or installed USB wireless LAN unit).
To display the selected source, press the ENTER button.
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 1 second, the projector
will search for the next available input source. Each time you press and hold the
SOURCE button for a minimum of 1 second, the input source will change as fol-
lows:
COMPUTER1 → COMPUTER2 → COMPUTER3 → COMPONENT → VIDEO
→ S-VIDEO → VIEWER → COMPUTER1 → ...
If no input signal is present, the input will be skipped. When the input source
you wish to project is displayed, release the button.
Using the Remote Control
Press any one of the COMPUTER 1/2/3, COMPONENT, VIDEO, S-VIDEO,
VIEWER or NETWORK buttons.
3. Projecting an Image (Basic Operation)
5
SELECT
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
SELECT
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
POWER POWER
OFF ON
COMPUTER
1
2
VIDEO VIEWER
COMPONENT
3
S-VIDEO NETWORK
SELECT
LASER
L-CLICK R-CLICK
MOUSE
PIP FREEZE
ASPECT LAMP MODE AUTO ADJ.
VOLUME MAGNIFY PAGE
UP
DOWN
USB
LAMP
STATUS
POWER
USB
LAMP
STATUS
POWER