NEC NP1250 User Manual page 142

Setting MONITOR OUT Connector [OUT TERMINAL]
This option allows you to determine which RGB or component source is output from the MONITOR OUT connector
during Standby mode.
LAST. . ..................... The.signal.from.the.last.COMPUTER.1,.COMPUTER.2.or.COMPONENT.input.will.be.output.to.the.MONI-
TOR.OUT.connector.
COMPUTER.1,.2..... The.signal.from.the.COMPUTER.1.or.COMPUTER.2.input.will.be.output.to.the.MONITOR.OUT.connector.
COMPONENT. . ........ The.signal.from.the.COMPONENT.input.will.be.output.to.the.MONITOR.OUT.connectors.
NOTE: When [COMPUTER 1] or [COMPUTER 2] is selected for [AUTO POWER ON(COMP1/2)], the [OUT TERMINAL] feature is
not available.
8
6. Using On-Screen Menu