Download Print this page

DCS BFG-30BS Specifications page 2

Outdoor liberty collection 30” dual side burner/sink

Advertisement

Dual Side Burner/Sink Dimensions
(with optional grill cart)
Dual Side Burner/Sink Model: BFG-30BS
Cart Model: CAD-30 (shown with optional side shelves)
24"
47-11/16"
36"
10-1/2"
MODEL NUMBER
SIDE BURNERS
SHIPPING WEIGHT
(SIDE BURNER/SINK HEAD)
SHIPPING WEIGHT
(OPTIONAL CART)
SHIPPING DIMENSIONS
(SIDE BURNER/SINK HEAD) (HEIGHT X WIDTH X DEPTH)
30"
26.5"
BFG-30BS
2 @ 17,000 BTU/HR
120 LBS.
120 LBS.
32" X 32" X 16"
Dual Side Burner/Sink Island
Preparation
Dual Side Burner/Sink Model: BFG-30BS
3" to non-combustible
construction and
12" min. combustible
construction
Vent
Vent
* Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
Island installation to use minimum of 3 vents providing
10 square inches per vent (typical)
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4" W.C.
• Supply Pressure: 6" to 9" W.C.
Propane
• 1/2" NPT male with a 3/8" flare adapter
• LP hose with a quick disconnect & fitting are shipped
connected
• Operational Pressure: 10" W.C.
• Supply Pressure: 11" to 14" W.C.
Power Requirements:
• 9V battery
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Side Burner/Sink Placement:
DO NOT build side burner/sink under overhead unprotected
combustible construction. Use only in well-ventilated areas.
These units are for outdoor use only. If located in a consistently
windy area (oceanfront, mountaintop, etc.) a wind break will be
required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your
dealer.
Accessories
• Stainless Steel Cart (CAD-30)
• Dual side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Brazilian Cherry Chopping Board that fits in cart optional
side-shelf
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
We encourage you to find out more about these features and learn how they can
make your cooking experience more enjoyable by visiting our learning page at:
www.dcsappliances.com.
Because of continuing product improvement these specifications are subject to
change without notice.
4" x 4" opening for
gas supply line
Vent
access doors
(ADN20x30)
access drawer
(ADR 30)
Summer 2008
35

Advertisement

loading