Edsal UR-364 Instructions & Assembly

edsal) steel Storage Rack
[B -Braces | 8 | RUBE1702 [17776]
[C -Post J 8 | RuPT 30025 [30° ]
[D -Wood Sheif | 4 | RPB21836 [352932]
[E-Coupier_[ 4 J Rmpco4og [ 4" |
MODEL NUMBER (s)
UR-364
'These units should be placed on a level surface. Failure to do so can result in poor product perforrr ance or create a possible
safety hazard. This unit should be securely anchored ĉo a wall or floor with suitable fasteners, whict are not included. Do not
use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY PART OF THE UNIT, OR
USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the heavier loads on the bottom. Use care
when working with metal parts.
'Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a c th or a block of wood be-
tween the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are sti igi and fully engaged.
'Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free
to contact our Edsal manufacturing facility at, (773) 475-3137 and request customer service. We can also be
reached on the internet at the following email address : service@edsal com.
'To obtain replacement parts, please provide the folowing information
=Model# -Part# & Description -Location Purchased - Date Purchased
Consumer Products Division
Edeal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609