Edsal UR-185WGB Manual

MODEL NUMBER (s)
edsal ) Steel Storage Rack
UR-185WGB - UR-245WGB
UR-185 WGB 5 Shelf
Part Number|
72" x 18"d
Part Si
10 | RUBE3502 | 35 7/16"
10| RUBE 1702 | 17 716"
RUPT36025|
[Rmpcosog | 4" |
'These units should be placed on a level surface. Failure to do so can result in poor product performance or create a possible
safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not included. Do not
Use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY PART OF THE UNIT, OR
USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the heavier loads on the bottom. Use care
when working with metal parts.
General Instructions
'Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood be-
tween the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.
Should you have any comments, damage, missing parts, or problems with assembly ofthis unit please feel free
to contact our Work Force manufacturing facility at. (773) 475-3137 and request customer service. We can aiso
be reached on the internet atthe following email address : customerservice@edsal.com. (Consumer Prachicts Division
Edsal Manufacturing Company
4400 South Packers Avenue
-Model# -Part# & Description _- Location Purchased _- Date Purchased