Start; Size - Qu-Bit Electronix Stardust Manual

Functions: Primary Controls

12. Start

The Start knob and CV input set the loop start point within the recorded buffer.
When the knob is fully to the left, the loop start is at the beginning of the recorded buffer. When
the knob is fully to the right, the start position is at the end of the recorded buffer.
The Start position is indicated by a
flutter
skip
Start CV Input range: -5V to +5V
in level
left

13. Size

right
The Size knob and CV input set the loop size relative to the loop start point. When the knob is
fully to the left, the loop size is 5ms. The loop size will increase while turning the knob to the right,
reaching the full buffer length when fully to the right.
The loop size is indicated by a
flutter
skip
Start, Size, and Buffer Loop Point: If the loop size extends past the recorded buffer end point
in level
due to the loop start position, the loop will continue at the beginning of the recorded buffer.
left
right
start
Size CV Input range: -5V to +5V
Stardust
freeze clock
erase undo hiss
varispeed
slice
inertia
start size
shift mix
record play reset reverse v/oct left
skip start size slice nova right
gold
Stardust
freeze clock
erase undo hiss
varispeed
slice
inertia
start size
shift mix
record play reset reverse v/oct left
skip start size slice nova right
size
blue LED animation in the galaxy LED cluster.
LED streak across the galaxy LED cluster.
12
Stardust
freeze clock
flutter erase undo hiss
varispeed
skip slice
inertia
start size
in level shift
left record play reset reverse v/oct
right skip start size slice nova
Stardust
freeze clock
flutter erase undo hiss
varispeed
skip slice
inertia
start size
in level shift
left record play reset reverse v/oct
right skip start size slice nova
size start
mix
left
right
mix
left
right